Bob & Keek
Build a DTF Gang Sheet
Build a DTF Gang Sheet
Artwork Requirements
• Upload print-ready PNG files with transparent backgrounds.
• Images should be 300 DPI for the best print quality.
• Please double-check sizing before submitting your order.
• Artwork will be printed exactly as received unless otherwise noted.
Whether you're stocking your boutique, fulfilling custom orders, or creating one-of-a-kind gifts, our Build Your Own Gang Sheets make professional-quality printing simple, affordable, and efficient.
SUBMITTING ARTWORK
SUBMITTING ARTWORK
PRINTS SUBMITTED MUST BE SIZED & READY TO PRINT!
I will print exactly what is submitted. I cannot make any modifications to designs. No Screenshots of images please! they can tend to be blurry so PLEASE BE AWARE. small fine prints can tend to be hard to work with, Make sure they have some thickness to them!
IF YOU'RE WANTING A TRANSPARENT BACKGROUND IMAGE HAS TO BE SENT AS PNG FORMAT.
We are not responsible for the end result of your product.
We recommend images to be in PNG format. 300 DPI resolution is suggested for best results
WE DO NOT OFFER REFUNDS ON CUSTOM ARTWORK ORDERS! PLEASE DOUBLE CHECK YOUR ORDER BEFORE SUBMITTING!
Care Instructions
Care Instructions
Are your transfers waterproof?
Yes, our best UV DTF transfers are waterproof and scratch resistant when applied correctly. Hand washing is recommended for decorated drinkware.
stress free Application
stress free Application
1. CLEAN THE SURFACE
Ensure the material surface is clean.
2. PEEL + POSITION
Peel back the clear carrier sheet slightly to expose the adhesive. Align the transfer carefully on the surface. For curved items, you can lightly heat the surface with a hairdryer to improve flexibility and adhesion.
3. PRESS FIRMLY
Use a squeegee or card to press the transfer firmly from the center outward, removing air bubbles and ensuring full contact with the surface. Always peel the white backing slowly and keep it close to the work surface to avoid tearing or misalignment. This step is key to long lasting adhesion.
4. Remove Carrier Film
Gently peel away the top clear film once the transfer is fully adhered. This reveals the glossy, finished design.
Leave the applied transfer for at least 24 hours to allow the glue to fully cure. If there is excess adhesive, it can be cleaned with soap and water after curing.
Share
